calmeas-logo1-256gray-300dpi.gif (6446 bytes)            calmeas-logo2-256gray-300dpi.gif (7666 bytes)

PC-2 AIR PARTICLE ANALYZER

An aerosol particle mass concentration and size distribution analyzer that gives you data instantly.

Copy of pc2-72dpi.jpg (22446 bytes)

Click here for Specification

To view picture of PC2 with optional chamber for use with nebulizer visit: http://techtrans.jpl.nasa.gov/success/stories/calmeas.html
or click here.

MICROANALYSIS PARTICLE SAMPLER

MPS-4G1 collects particles for direct Scanning Electron Microscopy and Energy Dispersive X-ray analysis.  It helps you find out what the particles are and where they come from.

 Copy of mps4g1-72dpi.jpg (20783 bytes)

Click here for Specification

AS-6

as6-72dpi.JPG (13765 bytes)

CASCADE IMPACTOR FOR AEROSOL DRUG MEASUREMENTS

This is a cascade impactor designed for the pharmaceutical scientist.
Its flow rate and size range conform to the 1989 FDA guidelines for testing metaproterenol sulfate and albuterol inhalation ae5rosols.  It operates at a flow rate of 12.5 liters/minute and has six impactor stages with cut-points of >16 - 8 - 4 - 2 - 1   - 0.5 microns.  A 0.3 micron after-filter is provided to catch particles less than 0.5 microns.

Its mechanical design was done with meticulous care and with a singular objective:   to provide you with an up-to-date and modern research tool.
It embodies technologies and experiences our company accumulated over fifteen years in designing and manufacturing cascade impactors for the aerosol research community.

HOME        UP

Up ] PC2 SPEC ] MPS-4G1 SPEC ]